Lockout and Tagout program and its procedure
Lockout and Tagout program is a combination of security devices or Locks to prevent unauthorized activation of mechanical or electrical equipment.
The technique of utilizing tags in conjunction with locks to raise awareness and visibility that equipment should not be energized or activated until such devices are removed.
Many managers still utilize old-school techniques to handle their lockout tagout programs – for example, Paperwork, spreadsheets, and binders. Every manufacturing industry should probably look at loto software that is specifically developed to make them simple and compliant with OSHA requirements.
This type of lockout tagout software is meant to make your procedures simple to create, manage, and access, so you don’t have to worry about misplacing paperwork or distributing folders throughout the workplace!
To learn more about the best Loto software visit our page.
Lock out tag out procedure:
Alert affected employees that a lock out or tag out system will be in a situation to use and why.
- The authorized employee must be aware of the type and amount of energy used by the machine or equipment, as well as the hazards associated with it.
- If the machine or equipment is still operational, shut it down using the standard stopping process – depress stop button, open toggle switch, etc.
- Turn on the switch, valve, or another energy isolating device to disconnect the machine from its power supply. Stored energy (such as that in springs, elevated machine members, revolving flywheels, hydraulic systems, and air, gas, steam, or water pressure, among other things) must be released or restrained using techniques such as repositioning, blocking, and so on.
- Lock out/tag out the energy isolating devices using individually assigned locks or tags.
- After checking that no workers are exposed and that all energy sources have been removed, operate the push button or other normal operating controls to ensure that the machine does not operate.
- CAUTION: After the test, return the operating control to the neutral or off position.
- The equipment has now been locked or tagged out.